Advertisement
2
Left Rear
Leg
3
4
5
Consumer Service: 1.800.453.7673
www.kolcraft.com
To Attach Legs to Tray
1
Flip tray upside down, with the rear left tire well facing
you, marked with an "L".
2
Locate the left rear leg (as pictured) and place in the
groove on the left tire well.
3
Locate the left rear leg locking collar. Align the L on the
lip of the collar with the L of the tray. Snap the collar
through the tray, securing the leg to the tray.
Repeat steps 2 & 3 for rear right leg.
4
Locate the front leg and place it in the front leg groove as
shown, aligning the screw holes.
5
Secure the front leg to the tray with screws in all four
places. Pull up on front leg to make sure the leg is
secure.
6
Advertisement
