Advertisement
1
Tabs
3
4
Tabs
5
To Attach Seat Pad to Tray
1
Push crotch portion of the seat pad inside out to form
seat, so that the fabric is below the seat back.
2
Place seat pad into seat ring located on tray. Align it so
that the highest point of the seat pad aligns with back of
walker ring.
3
Insert the 4 tabs on the seat pad into slots located around
the front of the seat ring. Slide tabs through holes.
4
Underneath the tray, pull tabs and align into grooves.
Grooves
5
Velcro the back of the seat pad around the rear of the seat
ring.
Test: Push down hard on seating area of seat pad to make
sure seat is securely in place.
CAUTION: Do not use walker if all tabs and Velcro are not
secured properly, otherwise child may fall through walker.
11
Consumer Service: 1.800.453.7673
www.kolcraft.com
Advertisement
