Advertisement
2
2
Please direct any comments, questions or replacement part requests to:
Kolcraft
Consumer Service Department
®
1100 W Monroe St. Chicago, IL 60607
1-800-453-7673 in U.S., 1-312-361-6315 outside U.S.
8 am-5 pm (CT) Monday - Thursday, 8 am - 3 pm Friday (CT)
e-mail: customerservice@kolcraft.com
To Adjust Seat Pad Height
NOTE: As your child begins to grow, adjust height of walker via
the seat pad so that their feet touch the ground when seated.
To determine correct height after assembly, place child in
walker and make sure both feet touch the ground. Always make
sure seat pad is adjusted to the correct height position before
placing child in product.
1
After seat pad is attached to tray, flip unit upside down to
access the restraint strap on underside of seat pad.
2
Please note, to ensure proper operation, you will need to
periodically adjust the seat restraint to accommodate your
childs increased height. For smaller babies, seat pad
should be extended to its lowest position. To adjust seat
height, push button in on restraint strap to release
restraint.
3
As baby grows, raise seat by tightening belt. This helps
to prevent the child from placing their feet flat on ground
and prevents your child from climbing out.
To Convert to Walk-Behind Walker
1
Remove the seat pad by unfastening the 4 seat tabs from
the tray and unsnapping the rear of the seat pad.
2
Your child can now stand behind the walker, using the
texturized handle grip for support as they learn how to
walk in the walk-behind mode.
12
Advertisement
