G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
G
G
Continuing embroidering after your machine is turned off
If the machine was turned off, restart embroidering as explained below.
Example: To continue embroidering from the second color
Turn on the machine and insert the design frame.
1
Select the pattern that you wish to
2
finish. When a screen like the one
shown at the right appears, press the
key.
A screen like the one shown at the right
3
appears.
4
Press the
1.
Key information
•
If you go forward too far, press the
5
Like in step 4 on page 42, press the
sewing stopped.
Go back a little before the point where sewing stopped so the stitches will overlap a little.
Key information
•
If you go forward too far, press the
key until "02" appears at
STOPPING AND CONTINUING EMBROIDERING
key.
key to go forward to the point where
key.
1
43