Transportation, Storage And Disposal; Technical Data - Husqvarna 525PT5S Operator's Manual

Transportation and storage
• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel and chain oil tanks before
transportation or before long-term storage. Discard
the fuel and chain oil at an applicable disposal
location.
• Use the transportation guard on the product to
prevent injuries or damage to the product. A saw
chain that does not move can also cause serious
injuries.
• Remove the spark plug cap from the spark plug.
• Attach the product safely during transportation.

Technical data

Engine
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Recommended max. speed, rpm
Idle speed, rpm
Max. engine output, according to ISO 8893, kW/rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, litre/cm
Oil tank capacity, litre/cm
Weight
Without fuel, cutting attachment and guard, kg
24

Transportation, storage and disposal

Technical data
3
3
3
To prepare your product for long-term
storage
1. Stop the product and let it become cool before you
disassemble it.
2. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION:
guide bar are not cleaned, they can
become rigid or blocked.
3. Attach the transportation guard.
4. Clean the product. Refer to
for instructions.
5. Do a complete servicing of the product.
525PT5S
25.4
34
28
11000-12000
2800-3000
1.0/8500
Yes
Yes
NGK BPMR8Y
0.5
0.5/500
0.14/140
7
If the saw chain and
Maintenance on page 15
712 - 007 - 28.04.2021