Related Manuals for JAYLINE UL200
Summary of Contents for JAYLINE UL200
- Page 1 UL200 FREESTANDING WOOD FIRE OWNERS OPERATING INSTRUCTIONS Please leave this information with the appliance October 2014 JUNE 2018 MARCH 2021...
-
Page 2: Product Registration
PRODUCT REGISTRATION TO ACTIVATE YOUR EXTENDED WARRANTY COVER, PLEASE COMPLETE AND RETURN WITHIN 30 DAYS OF INSTALLATION TO: OR ONLINE AT: RETAIL LINKS LTD www.jayline.co.nz/manuals-technical/ PO BOX 9056 ANNESBROOK, 7044 NELSON NAME: ________________________________________________________________________ ADDRESS: ____________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ EMAIL: ________________________________________ PHONE: ________________________... - Page 3 Congratulations on the purchase of your UL200 Ultra Low Emission Burner, by Jayline. UL200 Ultra Low Emission Burner is not a conventional wood fire, it is a ‘wood gasification stove’, developed for the optimal burning of air dried natural wood.
- Page 4 CORRECT OPERATION OF YOUR UL200 WOOD FIRE Simply by burning your UL200 fire correctly, you can improve efficiency, reduce fuel consumption and minimise air pollution. Starting A New Fire Please note: If lighting the fire for the first time, dust the fire, glass, trim and flue before firing to avoid particles sticking or discolouring.
-
Page 5: Lighting Instructions
(room) temperature. Once the initial fuel loads have burned down to an ember bed, the main loads can be applied (approximately 3kg of wood in two pieces). Apply further fuel as required. (Fig 3.) www.jayline.co.nz page 5 MARCH 2021... - Page 6 To ensure a clean burning and easy to use fire, it is important to maintain a suitable ember bed level. Once the UL200 is up to normal operating temperature (1-1.5hours after start up), the ember bed should be kept at a height of approximately 50% of the ember retaining glass.
-
Page 7: Important Points To Remember
It is often necessary to split some of the wood again before using it. The thickest piece size for high-efficiency and use in the UL200 fire should not exceed about 150mm (6 in.) across the largest dimension, or weigh no more than approximately 1.3kg. A range of smaller pieces will be needed for effective starting as described in the lighting instructions. -
Page 8: Cleaning And Maintenance
Clean all other external parts with a damp cloth. Never use alcohol or cleaning liquids. GENERAL SEASONAL INSPECTION: Jayline recommend all appliances are checked and serviced at least once every season by an NZHHA certified technician. This ensures safe operation of your appliance, and the opportunity to replace any consumables should it be necessary. - Page 9 Flue pipes can deteriorate very quickly with incorrect firing. CONSUMABLES Some parts of your UL200 fire are considered consumable. They are designed to be replaced as they will degrade over time. The life of the consumables will vary depending on;...
- Page 10 Change fuel for moisture level 10-25% only. WARNINGS Below is a list of warnings to ensure efficient and safe operation of your UL200 wood fire: • WARNING: DO NOT USE FLAMMABLE LIQUIDS OR AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHEN IT IS OPERATING.
- Page 11 Evidence of Jayline service pack at each 5 year interval enables your warrany for a further 5 years, up to a maximum 15 years.
- Page 12 JAYLINE WOOD FIRE - SERVICE REGISTER Jayline recommends NZHHA registered service technicians To ensure many years of performance and safety with your Jayline Fire, we have outlined the key servicing requirements that form part of routine annual servicing. Maintenance of parts that protect your firebox will extend the life of your fire, ensuring it burns clean and correctly.
- Page 13 13 MARCH 2021...
- Page 14 14 MARCH 2021...