Download Table of Contents Print this page

Brother QL-1060N Network User's Manual page 16

Multi-protocol on-board ethernet print server
Hide thumbs Also See for QL-1060N:

Advertisement

Table of Contents
c
Double-click the unconfigured device.
®
Windows
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• If the device requires a password, the default password is access.
• You can find the node name and Ethernet address by printing out the Printer Settings Page. See Printing
the Printer Settings on page 14.
d
Choose Static from Boot Method. Enter the IP address, Subnet Mask and Gateway (if needed) of
your print server.
®
Windows
e
Click OK.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.
®
Macintosh
®
Macintosh
Configuring your network printer
2
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ql-580n

Table of Contents