Toro Flex-Force Power System 51834 Operator's Manual page 14

Operation
Starting the Trimmer
1. Make sure that the vents on the trimmer are
clear of any dust and debris.
1. Trimmer venting areas
2. Align the cavity in the battery pack with the
tongue on the handle housing
3. Push the battery pack into the handle until the
battery locks into the latch
1. Battery latch
4. To start the trimmer, squeeze the lockout trigger,
then squeeze the run trigger
Figure 7
(Figure 8).
(Figure 8).
Figure 8
(Figure 9).
1. Lockout trigger
Shutting Off the Trimmer
To shut off the trimmer, release both triggers.
Whenever you are not using the trimmer or are
transporting the trimmer to or from the work area,
remove the battery pack.
g333378
Removing the Battery Pack
from the Trimmer
Press the battery latch on the machine to release the
battery pack and slide the battery pack out of the
machine (Figure
g339792
1. Battery latch
12
Figure 9
2. Run trigger
10).
Figure 10
g339793
g339794