Yolink YS1603-UC Installation Manual & Users Manual page 2

D
Wired and/or WiFi?
Your Hub must be connected to the Internet via WiFi
and/or a wired connection. For easy plug & play
installation with no need to change phone or Hub
settings, now or later, a wired connection, only, is
recommended. A wired connection may be best for
you, if any of these apply to you:

You'd rather not share your WiFi password with additional apps or
systems
You'd rather not have to update the app settings if you ever change
your WiFi password or make changes to the network equipment or internet
service provider
You have only a hot spot and/or do not have a permanently-installed
WiFi (no hot spots!)
Your WiFi has a second verification process or additional security
You forgot or do not have your password
Your WiFi is not dependable
E
Set-Up: Install YoLink App
If you have an existing account, proceed to Part F
1
Install the free YoLink app on your phone or tablet (search in
the store or click the QR code below)
iOS 9.0 and above or Android 4.4 and above
2
Allow the app to send notifications, if requested
3
Click on Sign up for an account to create your new account
Please retain your password in a secure location, as the Hub is
the gateway to your YoLink smart home environment!
If you encounter an error message attempting to create an account,
please turn off your phone's Wi-Fi, ensuring you are connected to the
internet via your phone's cell service, and try again
F
Add Your Hub to the App
The Hub must first be added to the app (to your
account). This is called "binding"
1
In the app, click on the device scanner icon:
Accept the request to access your camera, if needed
2
The scanner screen appears as shown below. Holding your
phone over the Hub, place the QR code within the viewing
window
3
When prompted, click Bind Device. A message the device has
been bound appears
4
Close the pop-up message by clicking Close
5
Click Done (Figure 1)
6
Refer to Figure 2 for the Hub successfully added to the app
Figure 1 Figure 2