Introduction; Device Description; Scope Of Delivery - Scheppach TRW1200 Translation Of Original Instruction Manual

1. Introduction

Manufacturer:
scheppach
Fabrikation von
Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much en-
joyment and success.
Note:
According to the applicable product liability
laws, the manufacturer of the device does
not assume liability for damages to the
product or damages caused by the product
that occurs due to:
• Improper handling,
• Non-compliance of the operating instruc-
tions,
• Repairs by third parties, not by authorized
service technicians,
• Installation and replacement of non-orig-
inal spare parts,
• Application other than specified,
• A breakdown of the electrical system that
occurs due to the non-compliance of the
electric regulations and VDE regulations
0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the oper-
ating instructions before installing and com-
missioning the device.
The operating instructions are intended to
help the user to become familiar with the
machine and take advantage of its applica-
tion possibilities in accordance with the rec-
ommendations.
The operating instructions contain important
information on how to operate the machine
safely, professionally and economically,
how to avoid danger, costly repairs, reduce
downtimes and how to increase reliability
and service life of the machine.
18 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
In addition to the safety regulations in the
operating instructions, you have to meet the
applicable regulations that apply for the op-
eration of the machine in your country.
Keep the operating instructions package
with the machine at all times and store it in a
plastic cover to protect it from dirt and mois-
ture. Read the instruction manual each time
before operating the machine and carefully
follow its information. The machine can only
be operated by persons who were instruct-
ed concerning the operation of the machine
and who are informed about the associated
dangers. The minimum age requirement
must be complied with.
In addition to the safety instructions in this
operating manual and the separate regu-
lations of your country, the generally rec-
ognised technical rules relating to the
operation of such machines must also be
observed.
We accept no liability for accidents or dam-
age that occur due to a failure to observe
this manual and the safety instructions.

2. Device description

1. Mixing paddle (adapter)
2. Mixing paddle (includes mixer element)
3. Drive shaft
4. ON I OFF switch
5. Circuit breaker for ON/OFF switch
6. Speed controller
7. Handles
8. Motor

3. Scope of delivery

Motor unit
Mixing paddle (adapter)
Mixing paddle (includes mixer element)