Brother HL-5270DN User Manual page 72

NETWORK for HL-5280DW users
Submenu 1 Submenu 2
WIRED WIRED
ENABLE
TCP/IP
ENET
NETBIOS/IP
SET
DEFAULT
WLAN WLAN
ENABLE
TCP/IP
WIRELESS
The default settings are shown in Bold with an asterisk.
Menu Selections Options
ON*/OFF
TCP/IP ENABLE ON*/OFF
IP ADDRESS= ###.###.###.###
(169.254.###.###)*
SUBNET MASK= ###.###.###.###
(255.255.0.0)*
GATEWAY= ###.###.###.###
(0.0.0.0)*
IP BOOT TRIES # (3)
IP METHOD AUTO*/STATIC/RARP/BOOTP
/DHCP
APIPA ON*/OFF
IPV6 ON/OFF*
AUTO*/100B-FD/100B-HD/
10B-FD/10B-HD
ON*/OFF
Restores wired network settings of the internal print server to default.
ON*/OFF
TCP/IP ENABLE ON*/OFF
IP ADDRESS= ###.###.###.###
(169.254.###.###)*
SUBNET MASK= ###.###.###.###
(255.255.0.0)*
GATEWAY= ###.###.###.###
(0.0.0.0)*
IP BOOT TRIES # (3)
IP METHOD AUTO*/STATIC/RARP/BOOTP
/DHCP
APIPA ON*/OFF
IPV6 ON/OFF*
SECUREEASYSETUP YES*/EXIT
Descriptions
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway address.
Chooses the IP method that best
suits your needs.
Automatically allocates the IP
address from the link-local
address range.
Chooses Ethernet link mode.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway address.
Chooses the IP method that best
suits your needs.
Automatically allocates the IP
address from the link-local
address range.
4. Control Panel
1
1
64