Important Information: Regulations; Radio Interference (220 To 240 Volt Model Only); International Energy Star ® Compliance Statement; Iec 60825-1 Specification (220 To 240 Volt Model Only) - Brother HL-5270DN User Manual

Important information: Regulations

Radio interference (220 to 240 volt model only)

This printer follows EN55022 (CISPR Publication 22)/Class B.
Before you use this product, make sure that you use one of the following interface cables.
1 A shielded parallel interface cable with twisted-pair conductors and that it is marked IEEE 1284 compliant.
2 A USB cable.
The cable must not be more than 2 meters long.
International E
NERGY
The purpose of the International E
of energy-efficient office equipment.
TAR ®
As an E S Partner, Brother Industries, Ltd. has determined that this product meets the E
NERGY
®
S guidelines for energy efficiency.
TAR

IEC 60825-1 specification (220 to 240 volt model only)

This printer is a Class 1 laser product as defined in IEC 60825-1 specifications. The label shown below is
attached in countries where it is needed.
This printer has a Class 3B laser diode which produces invisible laser radiation in the laser unit. You should
not open the laser unit under any circumstances.
Caution
Use of controls or adjustments or performance of procedures other than those specified in this User's Guide
may result in hazardous radiation exposure.
®
S Compliance Statement
TAR
TAR ®
S Program is to promote the development and popularization
NERGY
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
B. Appendix (For Europe and Other Countries)
NERGY
133