For Network Interface Cable Users; For Brother Peer-To-Peer Network Printer Users (Lpr / Netbios); Brother Peer-To-Peer Network Printer Users (Lpr); Brother Peer-To-Peer Network Printer Users (Netbios) - Brother HL-5170DN Quick Setup Manual

Step 2

For Network Interface Cable Users

For Brother Peer-to-Peer Network Printer Users
(LPR / NetBIOS)
If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation.
Before installation, if you are using Personal Firewall software (e.g. the Internet Connection Firewall
available in Windows XP), disable it. Once you are sure that you can print, re-start your Personal
Firewall software.
Connecting the printer to your network and installing the driver
1
Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2
Select the Network interface.
3
Turn off the printer power switch.
4
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
16
Installing the Driver
5
Turn on the printer power switch.
6
Click the Next button when the movie
finishes.
7
Click the Install button.