Creating Print Queue Object; Configuring In Bindery Service - Brother HL-4200CN Network User's Manual

Creating Print Queue Object

3
Click the Create button. The Input Name dialog box is displayed.
4
If Context is correctly set, enter the printer name in the Queue Name field, and click the OK button.
Example: BRN_4000F4-Q
5
Click the Select button on the right of Queue Volume box.
6
In the Select Object dialog box, select the volume of the created object, and then click the OK
button.
7
Check that the selected object name is displayed in Queue Volume of the Input Name dialog box,
and then click OK.
The Print Queue name will be entered in Queue of the NetWare Print Environment Settings dialog box.
8
When the print server, printer and queue are all set, click the OK button.
You can specify users that can be connected to the queue by clicking the User button.
9
Check that the settings specified in the NetWare Print Environment Settings dialog box are entered
in the NetWare tab of the Configure dialog box as follows:
Example:
Item
Print Server Name
Remote Printer Name
NDS Tree Name
Context Name
10
Click the NetWare Control tab.
11
Enter the required item and click the OK button.
12
When you use Remote Printer mode, reboot the NetWare print server on the NetWare file server.

Configuring in Bindery Service

We have to create the print server, printer, and each object of the queue for this printer on the NetWare
file server.
1
Click Print Environment Settings.
Queue Server Mode
BRN_4000F4
---
BRTREE
0U=SALES.
0=BROTHER
Remote Printer Mode
CLEVER-PS (selected from
already existing print server)
BRN_4000F4-P
BRTREE
0U=SALES.
0=BROTHER
NOVELL NETWARE PRINTING 6 - 4