Network
Before the system can be used, the data sources need to
be configured.
Sources
A data source can be a sensor or a device connected to
the network that provides information and commands to
other networked devices. The data sources are normally
configured the first time the system is turned on. It should
only be necessary to update this data if a new source is
added, data is missing or removed, a source has been
enabled/disabled, a sensor replaced or after a network
reset.
Auto Select
The Auto Select option looks for all sources connected to
the network. If more than one source is available for each
item, the gauge automatically selects from the internal
device priority list.
Device list
Shows a list of all devices connected to the network.
40 |
Settings |
Honda HD-4 User manual