Adding fuel
1 Make sure the vessel setup is complete and the
number of tanks and total fuel capacity is set to the
correct value.
2 Enter the amount of fuel added to the tank into the
Amount added section, or select Set to full when filling
the tank to its maximum capacity.
Fuel Used
The Fuel Used dialog shows how much fuel has been
used since last fill, from trip reset and seasonal usage
(continuous recording).
Note:
¼
If more than one engine is on the network,
then the Fuel Used data shown is the total for all engines.
It also lists the data for each engine.
Refueling |
Honda HD-4 User manual
| 31