Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HONDA marine HD-4
Summary of Contents for HONDA marine HD-4
- Page 1 HD-4 Color Display User Manual ENGLISH...
- Page 3 Copyright All rights reserved — © 2017-2021 American Honda Motor Co., Inc. Warranty This warranty is limited to Honda Marine parts, accessories and apparel when distributed by American Honda Motor Co., Inc., 1919 Torrance Blvd., Torrance, California 90501-2746. Preface |...
- Page 4 E.E.A. This gauge complies with the following regulations: • CE under EMC directive 2004/108/EC • Level 2 devices of the Radio communications (Electromagnetic Compatibility) standard 2008 The Declaration of conformity is available from www.simrad-yachting.com Preface | Honda HD-4 User manual...
-
Page 5: For Your Safety
Introduction This manual is a reference guide for operating the Honda HD-4 Color Display. Important text that requires special attention is emphasized as follows: Note: ¼ Used to draw attention to a comment or important information. For your safety Your safety and the safety of others are very important. We have provided important safety messages in this manual. -
Page 6: Software
NOTICE. This word means: Notice: Your display/gauge, other property or the environment can be damaged if you don’t follow instructions. Software This manual is written for: Honda HD-4 Color Display software version 19.1. Please check www.marine.honda.com for details on release version. Introduction |... -
Page 7: Table Of Contents
Contents Introduction For your safety Safety Instructions Software Honda HD-4 Color Display Display and keys Default display pages Page transition Initial setup Select Language Time Units Vessel Setup Engine Display Setup Gauge Limits Pop-Ups Setup Operation Menu operation Page menu... - Page 8 Fuel Used Reset Settings Engine alarms System alarms Enabling an alarm (alarm on/off ) Alarms Setting status Alarm limits Alarm indication Acknowledging an alarm Active Alarms Alarm History Alarm details Engine alarm settings Alarm Siren Contents | Honda HD-4 User manual...
- Page 9 Damping System Decimal places Language Time Simulate Restore defaults Forced factory reset Files Connecting a Micro-USB device Export system settings Import system settings Software About Remote device software upgrade Maintenance Specifications Distributor’s Limited Warranty Contents | Honda HD-4 User manual...
-
Page 10: Honda Hd-4 Color Display
Honda HD-4 Color Display The Honda HD-4 Color Display is a NMEA 2000® networked gauge that displays the vessel’s engine data and fuel tank information. It can also display instrument data including speed, depth, heading, position, wind and environmental data measured by optional sensors and other equipment connected to the network. -
Page 11: Default Display Pages
Adding or removing devices from the network may change which data types are displayed on the gauge. See the Pages section of this manual for more information on page setup and configuration. | 11 Honda HD-4 Color Display | Honda HD-4 User manual... -
Page 12: Page Transition
Gauge limits. Select Language Set the preferred language for the gauge. Use the UP/ DOWN keys to scroll through the languages. Press the ENTER key to save the selection. 12 | Honda HD-4 Color Display | Honda HD-4 User manual... -
Page 13: Time
Press the ENTER key again to exit the option. Select NEXT to save the selections. Units Set the preferred Units. Use the UP/DOWN keys to scroll through the options. Press ENTER to save the selection. | 13 Honda HD-4 Color Display | Honda HD-4 User manual... -
Page 14: Vessel Setup
Each gauge can display data from one to two engines. Select which engine’s data to display on the gauge. Use the UP/DOWN keys to scroll through the options. Select OK to save the selections. 14 | Honda HD-4 Color Display | Honda HD-4 User manual... -
Page 15: Gauge Limits
These limits are a visual guide on the display and do not set alarms. Select OK to save the selections. The example below shows a Red Line Start setting of 6,000 RPM. | 15 Honda HD-4 Color Display | Honda HD-4 User manual... -
Page 16: Pop-Ups Setup
Select OK to save the selections. Pop-ups appear when the gauge sees a change in data that is greater than the set threshold. Note: ¼ To disable pop-ups, select OFF. 16 | Honda HD-4 Color Display | Honda HD-4 User manual... -
Page 17: Operation
Example menu structure 1 Press the MENU key. 2 Use the UP/DOWN keys to navigate through the menu options and the ENTER key to make selections. | 17 Operation | Honda HD-4 User manual... -
Page 18: Backlight
Example: Access Key beeps dialog via the settings menu. Pressing the MENU key once returns you to Note: ¼ the previous menu. Backlight There are two methods of adjusting the gauge backlight. 1 Via the menu 18 | Operation | Honda HD-4 User manual... -
Page 19: Display Group
Display group will also change to Night Mode. Note: ¼ Gauge night mode cannot be changed via a Multi-Function Display. Night mode color Changes the Night mode color palette. | 19 Operation | Honda HD-4 User manual... -
Page 20: Pages
2 Depth (Requires depth data on the network) 3 RPM 4 Fuel economy 5 Fuel flow Note: ¼ When data from two engines is displayed, only RPM, Engine trim and Engine block temp are shown. 20 | Operation | Honda HD-4 User manual... -
Page 21: Default Fixed Data Pages
Motoring dynamic data field priority order 1 Speed (Speed Over Ground preferred. Requires GPS, paddle wheel, Pitot) Depth (Requires depth data on the network) 2 Vessel fuel economy 3 Vessel fuel rate | 21 Operation | Honda HD-4 User manual... - Page 22 Vessel fuel remaining will only be shown when fuel flow data is available and a fuel storage device such as a Fuel Data Manager is on the network. Engine Description Description Dynamic data fields Static gauge 22 | Operation | Honda HD-4 User manual...
-
Page 23: Template Pages
3 Engine hours 4 Engine trim Template pages Icon Description Page Single gauge (with RPM) 2x2 grid (with RPM) 2x1 grid (with RPM) 2x2 (bars) grid (with RPM) Quad bars (with RPM) | 23 Operation | Honda HD-4 User manual... -
Page 24: Enabling/Disabling A Page
Replacing/adding a page. 1 Press the ENTER key on the desired page to open the Enabled/Replace dialog. 2 Press the ENTER key to toggle On/Off. 24 | Operation | Honda HD-4 User manual... -
Page 25: Replacing/Adding A Page
The selected page is shown in the active pages list. Renaming a page 1 Select the page you want to rename. 2 Press the ENTER key to open the Page Options dialog. 3 Select Change name from the Page Options dialog. | 25 Operation | Honda HD-4 User manual... -
Page 26: Configuring Page Data
1 Select a page that can be changed, i.e. 2x1 grid. 2 Press the MENU key. 3 Select Change data. 4 Select the desired field. 5 Select the desired data type from the menu options. 26 | Operation | Honda HD-4 User manual... -
Page 27: Autoscroll
7 Select Save. Note: ¼ If a data type is selected but there is no sensor information on the network, the gauge will show as ---. AutoScroll Select AutoScroll from the pages menu. | 27 Operation | Honda HD-4 User manual... -
Page 28: Trip Log
Trip information is calculated using GPS or the paddlewheel if GPS is not present. No Trip Log information is recorded while the Trip Log is stopped. Start/Stop Trip Log Starts/Stops the trip log recording. 28 | Operation | Honda HD-4 User manual... -
Page 29: Reset Trip Log
Reset Trip Log Resets all trip log information to zero. | 29 Operation | Honda HD-4 User manual... -
Page 30: Refueling
The number of tanks and fuel capacity can be updated using the Vessel Setup page in the installation menu, or by using the initial setup wizard. 2 Go to the Refuel dialog via the Settings menu. 30 | Refueling | Honda HD-4 User manual... -
Page 31: Adding Fuel
(continuous recording). Note: ¼ If more than one engine is on the network, then the Fuel Used data shown is the total for all engines. It also lists the data for each engine. | 31 Refueling | Honda HD-4 User manual... -
Page 32: Fuel Used Reset
You can reset the total for one engine or all engines. Reset option Description None Returns to Fuel Used page Trip Reset Trip fuel used only Seasonal Reset Seasonal fuel used only Both Reset Trip and Seasonal fuel used 32 | Refueling | Honda HD-4 User manual... -
Page 33: Settings
The relevant sensor must be on the network for the alarm to be enabled. Icon Alarm description Low oil pressure Engine overheat ACG / Charge indicator Check engine / General engine faults / Engine or its related system faults | 33 Settings | Honda HD-4 User manual... -
Page 34: System Alarms
If a sensor is connected to the network, you can enable alarms by selecting them from the list in the Alarm Settings menu. Enabling an alarm (alarm on/off) Turns an alarm on or off via the Alarm Settings menu. 34 | Settings | Honda HD-4 User manual... -
Page 35: Alarms Setting Status
There is a sub menu with other alarm groups. Select the next level down in the menu to show the alarm status | 35 Settings | Honda HD-4 User manual... -
Page 36: Alarm Limits
An alarm is acknowledged by pressing the ENTER key. This removes the alarm notification and silences the alarm. In some cases, the alarm icon remains on the gauge until the fault is resolved. 36 | Settings | Honda HD-4 User manual... -
Page 37: Active Alarms
The alarm history can be accessed via the Alarm History menu. This stores alarm messages until they are manually cleared. Alarm details Select an alarm instance to show more details of that specific occurrence and the action taken. | 37 Settings | Honda HD-4 User manual... -
Page 38: Engine Alarm Settings
Custom Setting can be used to select which engines alarms are on or off. Setting Description All alarms for all engines are on Individually activate/deactivate engine Custom alarms Alarm Siren When enabled, an audible alarm sounds when an 38 | Settings | Honda HD-4 User manual... -
Page 39: Damping
The greater the damping value, the smoother the number change will be, but the change will also be slower. System From the System menu, there are several display and system options available. | 39 Settings | Honda HD-4 User manual... - Page 40 If more than one source is available for each item, the gauge automatically selects from the internal device priority list. Device list Shows a list of all devices connected to the network. 40 | Settings | Honda HD-4 User manual...
- Page 41 Some devices show additional options specific to the device. For example, the Calibrate option allows easy setup of a device. Calibration options vary depending on the device. Diagnostics NMEA 2000® Bus diagnostic data on the network. | 41 Settings | Honda HD-4 User manual...
-
Page 42: Decimal Places
Set the preferred language for the gauge. Note: ¼ This is not a network function. You need to change all gauges separately. Note: ¼ The unit automatically restarts once the language is selected. 42 | Settings | Honda HD-4 User manual... -
Page 43: Time
A Simulating warning box flashes on and off at the top of the display. Note: ¼ To exit the simulate mode, disable the Simulate option in the System menu. | 43 Settings | Honda HD-4 User manual... -
Page 44: Restore Defaults
Access an attached USB device, import/export system settings, template page, and vessel setup. Upgrade the software on the engine gauge and remote devices. Note: ¼ Each gauge on the network needs to be upgraded individually. 44 | Settings | Honda HD-4 User manual... -
Page 45: Connecting A Micro-Usb Device
1 Insert a USB Micro USB adapter and mass storage device. 2 Go to the Files menu. 3 Select System Settings. 4 Press the ENTER key to export system settings to the USB mass storage device. | 45 Settings | Honda HD-4 User manual... -
Page 46: Import System Settings
Press the MENU key to exit. To show the current version of software on a remote device, go to the Device List and select the relevant device. 46 | Settings | Honda HD-4 User manual... -
Page 47: Remote Device Software Upgrade
3 Connect the portable storage device to the micro USB slot. 4 Select the update file from the USB memory. 5 When the details dialog appears, press the ENTER key. 6 Press the ENTER key again to confirm upgrade. | 47 Settings | Honda HD-4 User manual... -
Page 48: Maintenance
Make sure that none of the keys are stuck in the down position. Checking the connector The connector should be checked by visual inspection only. Ensure that the cable is connected correctly and the USB port cover is in place. 48 | Maintenance | Honda HD-4 User manual... -
Page 49: Specifications
White (day mode) Red/Green/Blue (night mode) Environmental IPX7 Protection Safe distance to 0.3 m (1.0 ft) compass Temperature Operating -15 to +55ºC (+5 to +131ºF) Storage -25 to +65ºC (-13 to +149ºF) | 49 Specifications | Honda HD-4 User manual... -
Page 50: Distributor's Limited Warranty
Distributor’s Limited Warranty Accessories and Replacement Parts This warranty is limited to Honda Marine parts, accessories and apparel when distributed by American Honda Motor Co., Inc., 1919 Torrance Blvd., Torrance, California 90501-2746. Length of Warranty: (from date of original retail purchase):... - Page 51 Honda Marine authorized service facility or dealer in the United States, Puerto Rico, or the U.S. Virgin Islands, during normal business hours.
- Page 52 This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. NOTES 52 | Distributor’s Limited Warranty | Honda HD-4 User manual...
- Page 54 www.marine.honda.com...