• Always unplug the unit before working on it. • Only use clear water and a soft brush to clean the unit. • Only use original spare parts and accessories. • Should problems occur, please contact the authorised customer service or OASE.
Page 3
WARNING Serious injury or death due to dangerous electrical voltage is possible with an electri- cal device in water operated with a voltage U > 12 V AC or U > 30 V DC. Disconnect the unit from the mains before reaching into the water. ...
Product Description Overview ARS0037 Filter housing with filter pump Transition piece, fastens the filter pump to the filter cover Branch valve with flow-rate regulators Stepped hose adapter ½, ¾, 1 in for connection of a rivulet or a waterspout Union nut for fastening the nozzle pipe on the branch valve Nozzle pipe Nozzle mount Nozzle inserts (Vulkan, Lava, Magma) for different water patterns...
Intended use Only use the product described in this manual as follows: • For pumping normal pond water for filter systems, waterfall systems and water course systems. • For household use only. • Operate in accordance with instructions. (→Technical data) The following restrictions apply to the unit: •...
Page 7
Installing the pump WARNING Severe injuries or death due to operation of this unit in a swimming pond. Defective electrical components will electrify the water with dangerous electrical voltage. Never operate the unit in a swimming pond. WARNING The unit is subject to dangerous voltage and must not be installed directly adjacent to the water.
Commissioning/start-up WARNING Risk of electric shock. This unit is supplied with a grounding conductor and ground- ing-type attachment plug. To reduce the risk of electric shock, be certain that the unit is connected only to a properly grounded, groundingtype receptacle. NOTE Never connect the pump to a dimmer.
Cleaning/replacing the impeller unit • Remove the pump cover or pump housing from the motor housing by turning it counter-clockwise (bayonet catch). • After removing the impeller unit, clean all parts under running tap water. • Replace a worn or damaged impeller unit. •...
• Clean nozzle The water pattern is uneven or Nozzle is blocked incomplete Technical data Unit data Aquarius Fountain Set Eco 1100 Connection voltage AC V Mains frequency Max. power consumption Max. current consumption Max. pump capacity 1100 2100 3120 4180 Max.
Wear parts • Impeller unit Disposal NOTE Do not dispose of this unit with household waste. Dispose of the unit by using the return system provided for this purpose. Render the unit unusable by cutting the cables.
Need help?
Do you have a question about the Aquarius Fountain Set Eco 250 and is the answer not in the manual?
Questions and answers