Menda Mega Vac Operation And Maintenance

Mega Vac Commercial Vacuum
Operation and Maintenance
Figure 1: The Mega Vac, Item

Description

The Menda 35851 Mega Vac is a high capacity, high
performance, service vaccum. This model has been
specifically designed with large clean-ups jobs in mind.
The powerful by-pass motor can handle almost any
job. It was designed for those technicians who require
a large, mobile vacuum for use in and around sensitive
electronic equipment such as copy centers, telecom
center, rechargers, garagesm refiners, shopsm and
schools. The standard 0.3 micron filter canister is ideal
for dust, glass, pollens, soot, drywall dust, brake dust,
toner, and other fine particles. The optional .12 micron
HEPA filter canister is suitable for lead and other
ultra-fine particles. The filters are fully container for
safe, easy disposal.
The Mega Vac is safe for ESD susceptible electronics.
The 10' long hose and the utensils are static
dissipative. The internal ground-wire in the flex-hose
and enclosure, virtually eliminate static charge
generation is safely dissipated back through the electri-
cally grounded motor.
Note: The Menda Mega Vac is designed for commer-
cial use only.

Inspection

Remove the Mega Vac from the shipping carton and
inspect for exterior damage.
TB-4004 June 2011 Page 1 of 2
TECHNICAL BULLETIN TB-4004
35851
3651 Walnut Avenue, Chino, CA 91710
Phone: (909) 627-2453 • Fax (909) 755-8848 • Web Site:

Items included with model 35851:

1 0.3 Micron 5 Gallon Filter Canister
1 10' Flex-Hose (Toner Proof and Static Dissipative)
1 Goose Neck Attachment
1 Crevice Attachment
1 Crevice Attachment Brush
1 Detachable Power Cord (110V Only)
1 Base With Easy Rollers
1 Foot Switch
Figure 2: Items included with Model

Optional Accessories

35858 Replacement 0.3 Micron Filter Canisterr

Operation

Place the vacuum head
onto the filter canister by
inserting the white down
tube into the
corresponding size hole in
the filter (fig. 3). Align the
rubber retaining clips with
the corresponding chrome
retainer latches on the
vacuum head and stretch
into the place (fig. 4).
Place the head and
canister into the mobile
base. Insert either end
of the flex hose into the
knurled aluminum
recepticle on the top of the
vacuum head (fig. 5).
MendaPump.com
Made in America
35851
Figure 3: Aligning down
tube
© 2011 DESCO INDUSTRIES INC.
Employee Owned