Running The Setup Utility - MAXDATA 400M User Manual

Configuring Your System

11.2 Running the Setup Utility

You will be greeted by this screen when you enter the SETUP Utility.
Standard CMOS setup for changing time, date, hard disk type, etc.
The above display screen will be referred to as Setup Entry Screen. Detail on the above
major sub-menus (options) will be described on the following pages.
Movement within the SETUP utility
To move between the different item fields or to move between the sub-menus, use the
arrow keys ↑, ↓, ←, and →. To change the value of a field press the PgUp and PgDn
keys. When you select one item, that item will be highlighted (in gray background) and a
brief explanation will be displayed the near bottom or on the right side of the screen.
The followings are some of the most commonly used keys:
•
Pressing <F3>, <F4> will change the color of the screen.
•
Pressing <F10> will save changes on settings and exit.
•
Pressing [Esc] will get you to the Setup Entry Screen if you are in the
sub-menu. If you are already in the Setup Entry Screen, pressing [Esc]
will allow you to exit the SETUP utility.
Page 11-2
AMIBIOS HIFLEX ENGLISH SETUP - VERSION 1.19
(C)2000 American Megatrends, Inc. All Rights Reserved
BIOS Revision 700A_A0x
Standard CMOS Setup
Advanced CMOS Setup
System Security Setup
Power Management Setup
Boot Device Setup
Auto Configuration with Defaults
Save Settings and Exit
Exit Without Saving
ESC: Exit ↑↓: Sel F3/F4:Color F10:Save & Exit
Information in this document is subject to change without notice!!!
Model 400M & 700T User's Manual
Peripheral Setup