24 Chapter 1 Introducing the 1600 Series Switch
Ethernet Routing Switch 1612G
The 1612G switch has 12 slots that accept Gigabit SFP modules for network
connections at 1000 Mb/s.
Switch 1612G front panel.
Figure 3 Ethernet Routing Switch 1612G Front Panel
The LEDs on the front panel indicate the status of each of the following:
•
•
•
Generally, a lit LED indicates a functioning power supply or port. A flashing LED
indicates either activity on an Ethernet port, or a failure of one of the two built-in
AC power supplies.
Enclosure
Each 1600 Series switch consists of a standard 19" rack-mountable, sheet metal
enclosure. Mounting ears are included in the switch's packaging to allow
mounting the switch in a standard 19" electronic equipment rack.
Cooling fans and air vents are located on the sides and the back panel of the
enclosure. When mounting the switch, ensure that these cooling fans and vents are
not blocked. In addition, you should allow sufficient airflow to prevent the switch
from over-heating.
316860-D
12 Gigabit Ethernet SFP fiber optic modules
main and redundant power supply
out of band 10/100 Management port
Figure 3 on page 24
shows the Ethernet Routing