Set Up - MAGMATIC Magma Prime User Manual

SET UP

1. Open the shipping carton and carefully remove the unit and all included items from the shipping
carton.
2. Be sure to remove all the packing material especially around the nozzle.
3. Set the machine on a flat dry surface. Remove the fluid reservoir cap and carefully fill the fog fluid
reservoir with Atmosity Extreme Filtered water based smoke & haze fluid. Once the fluid tank is
filled, replace and tighten the reservoir cap.
4. Connect the unit to a matching power supply and put the power switch into the "ON" position.
Once power is applied, the fan will begin to operate and the machine will begin to heat up. When
the machine is heating up, the display will read "HEATING" in the top left corner with the
heating percentage.
5. The machine takes 6 minutes to heat up. When the machine has reached its operating temperature
the display will read "READY".
6. To emit haze, select your desired operating mode using the touch screen display. See the
Control Panel and System Menu sections of this manual.
10