The Different Connection Methods - Baracoda Pencil 2 User Manual

All manuals and user guides at all-guides.com

The different connection methods

There are two (2) different way to create a connection from a Host and a scanner:
-
Slave mode (by default)
The Host (PC, BaracodaManager, ...) is creating the connection onto the scanner.
- Master mode
The scanner is creating itself a connection to the recorded Host Bluetooth address. This connection
attempt is set after a scan of barcode. The configuration of Host address (on which the scanner will set
up a connection to) can be done:
Via BaracodaManager software (v3.35 min).
o
Via scan of barcodes.
o
All usage modes (Real Time, No Data Loss, Batch) are obviously available.
Baracoda Pencil2 – User Guide v1.4
Data Capture
for Workforce
in Motion
- 8 -