Page 7
Fitting the hose, Fitting the air seperator Fitting the hose, Fitting the air seperator...
Page 8
Moving the machine. Moving the machine. (370 Drum only) Tool Tidy (370 Drum only) Tool Tidy...
Page 9
Changing the bag, cleaning the filter Changing the bag, cleaning the filter (REF Page 15) (REF Page 15)
Page 10
Low Flow Indicator This appliance is fitted with a low flow indicator to show that air flow has reduced. In the event of the indicator light flashing, check the following:- Cause Solution Dust caps still fitted Remove the caps. Blocked hose Unblock the hose.
Page 12
About the machine Rating Label Vacuum cleaner, accessories and Company Name packaging should be sorted for & Address environmental-friendly recycling. Machine Description Only for EU countries: Do not dispose of Vacuum cleaner into household waste! According to the European Directive 2002/96/EC on waste electrical and electronic equipment and its incorporation Voltage / Frequency...
Page 13
Replace any worn or damaged parts immediately. • Regularly examine the power cord. If damage is found such as cracking or ageing the power cord must be replaced by a qualified person using the correct Numatic original part. • Change dust bag frequently.
Only use the dust collection bag (NVM-4B) once. This machine must only be repaired by suitably trained and authorised personnel. Only use genuine Numatic International Ltd spare parts, for repairs. This machine must not be installed as a fixed extraction system or run unattended.
Regularly examine the supply cord for damage, such as cracking or ageing. If damage is found, replace the cord before further use. All parts of this vacuum are safety critical only replace with the genuine Numatic spare parts. For user servicing, the machine must be dismantled, cleaned and serviced, as far as is reasonably practicable, without causing risk to maintenance staff and others.