Maintaining The Device; Accessories And Options; Technical Specifications - walser Walimex Pro StabyFlow Director System Instruction Manual

8. Maintaining the device

Check and service the system at regular intervals
What to do?
Check the fastening screws
Retighten if necessary
Check the equipment, e.g. camera for secure hold
Retighten the fastening , if necessary
Checking / adjusting the scissor strength
Cleaning
NOTE
Use only detergents listed in the following table.
Cleaning
Remove light and intractable dirt, if necessary
Vest
with a damp micro-fibre cloth
Remove light and intractable dirt, if necessary
Slide
with a damp micro-fibre cloth
Spring arm Clean off dirt with a dust brush or a dry, soft cloth

9. Accessories and options

You find optimal accessories for your device in our webshop.
30
10. Technical specifications
Before each use
X
X
X
Steadycam
Max. length of steadycam
Min. length of steadycam
Dimensions of camera mount (LxW)
Weight (without counterweights)
Max. loadability
Connecting thread
Length of holding grip
Counter weights
Vest with spring arm
Weight of vest
Weight of spring arm
Length of spring arm elements
Width of spring arm elements
ca. 68 cm
ca. 123 cm
ca. 17 x 6,5 cm
ca. 1,6 kg
ca. 6 kg
1/4"
ca. 12,5 cm
2x ca. 0,2 kg; 2x ca. 0,4 kg
ca. 2,1 kg
ca. 2 kg
1x ca. 24 cm
2x ca. 12,5 cm
1x ca. 11 cm
ca. 7 cm
31