Accurist CP00 Setting Instructions Manual page 56

To set the time:
1. Pull the crown out to the 2nd
position.
2. Turn the crown to set hour and
minute hands.
3. When the crown is pushed back to
the normal position, small second hand
begins to run.
To set your watch accurately visit
www.britishrealtime.com
To set the date:
1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set
the date.
*If the date is set between the hours of
around 9:00 PM and 1:00 AM, the date may
not change on the following day.
3. After the date has been set, push the
crown back to the normal position.
54