Accurist CP00 Setting Instructions Manual page 24

22
Chronograph zero set:
This procedure is only necessary when the battery is replaced, or when the
Chronograph hands do not return to the '0' position, when the Chronograph
mode is selected.
1. Gently pull out crown to position C
2. Push TR Button to advance the sweep second hand to the 12 0'clock position.
Please note each push of the TR Button will advance the hand 1 second.
Alternatively, depress and hold the Button for 2 seconds and the hand advances
continuously.
3. Push BR Button; this automatically re-sets sub dials. Each subsequent push
will advance the Second hand on sub dials by 1 marking. Alternatively, depress
and hold Button for 2 seconds; the hand will advance continuously until
released.
4. Push in crown to Position A.