Advertisement
CLC / CLT / CLP
CUSTOM DESIGN
RGB LCD DISPLAY BOARD
PROGRAMMING
AND
INSTALLATION
MANUAL
VERSION: 1.2
AYBEY ELEKTRONIK GmbH
Lothringer Allee 2 44805 Bochum Germany
T: +49 (0) 234 687 36 82 9 G: +49 (0) 176 404 30 68 4
e-mail: support@aybey-elektronik.de
www.aybey-elektronik.de
F/7.5.5.02.87 R:2
CLC / CLP
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Aybey Elektronik CLC
Summary of Contents for Aybey Elektronik CLC
- Page 1 CLC / CLT / CLP CUSTOM DESIGN RGB LCD DISPLAY BOARD PROGRAMMING INSTALLATION MANUAL VERSION: 1.2 AYBEY ELEKTRONIK GmbH Lothringer Allee 2 44805 Bochum Germany T: +49 (0) 234 687 36 82 9 G: +49 (0) 176 404 30 68 4 e-mail: support@aybey-elektronik.de...
- Page 2 It needs 12-24V DC supply. CLC and CLT get all information from CANBUs. CLC is used for fault tolerant applications and CLT is used for high speed applications. CLP board can be applied up to 64 stops with 6 gray-code, binary code inputs as M0,…,M5 or counter systems inputs as M0, 817, 818 and 7-Segment inputs.
- Page 3 SET AS A SINGLE COLOR TO ALL FLOORS If single color is desired in all floors and signals, then set floor 0 to desired color and push and hold ENT and DEC (↓) buttons both to save settings to permanent memory. F/7.5.5.02.87 R:2 CLC / CLP...
- Page 4 Simulation ID DEFINITION (Only in CLC and Board) ID information (0 to 63) of CLC and CLT boards must be set to identify address of it in CANBus communication. ID letters on display shows this menu. FLOOR COUNT DEFINITION Floor count at simulation mode can be set in this menu. SF letters on display shows this menu.
- Page 5 Push and hold ENT, DEC (↓) and INC (↑) buttons all 3 seconds to enter factory defaults mode and FD letters displays. Press INC (↑) button twice to set factory defaults. All colors and floor information return to factory defaults. F/7.5.5.02.87 R:2 CLC / CLP...
Need help?
Do you have a question about the CLC and is the answer not in the manual?
Questions and answers