Potential Hazards; Installation; Transport / Storage; Fitting - BOWMAN EC Series Installation, Operation, Maintenance Manual

The maximum permissible operating temperature must not exceed:
Oil side: 120º C
Cooling Water side: 110ºC
Variants with higher temperature and pressure ratings are available. Please
contact the Sales for further details

1.4 Potential Hazards

Ensure the maximum permissible operating pressures are not exceeded.
NB: Before the oil cooler is disconnected it must be allowed to cool and
Caution
be depressurized. The supply and return from the cooler should
be isolated to minimise fluid loss.
Take Care

2. Installation

2.1 Transport / storage

The oil cooler must be drained prior to transportation. Once drained
and dry, the oil cooler must only be stored indoors in a non-aggressive
atmosphere. The connections should be capped to avoid ingress of dirt and
contaminants.

2.2 Fitting

Before fitting, the cooler should be checked for visible signs of damage. The
oil cooler should be connected in counterflow so that the fluids flow in opposite
directions, as shown in the illustration below:
Take Care
Multiple units can be connected in parallel.
2 4