Indicators - Jenn-Air JIC4324KB Use & Care Manual

Assist
ASSISTED BOIL
This function allows you to bring water to boil and keep it boiling.
The water (preferably at room temperature) should be placed in the
pot and left uncovered. In all cases, users are advised to monitor
the boiling water closely, and check the amount of water remaining
regularly. The quantity of water should be based on the dimension
of cooking zone as shown in the following image.
8 cups (2 L)
2 cups
(0.5 L)
Ideal for boiling pasta, rice, vegetables, meats and fi sh.
08-Jan-2021 04:24:49 EST | RELEASED
20 cups
(5 L)
In some European factories the letter "W" of the part code mentioned herein will be automatically

Indicators

POT INCORRECTLY POSITIONED OR MISSING
This symbol appears if the pot is not suitable for induction
cooking, is not positioned correctly or is not of an appropriate
size for the cooking zone selected. If no pot is detected within
30 seconds of making the selection, the cooking zone switches
off.
RESIDUAL HEAT
If "H"appears on the display, this means that the cooking zone
is hot. The indicator lights up even if the zone has not been
activated but has been heated due to the use of the adjacent
zones, or because a hot pot has been placed on it.
When the cooking zone has cooled down, the "H" disappears.
IMPORTANT: Your unit has a built in feature to shut itself off
during over voltage conditions, water spillage on the touch
control, empty pan, or for extended cooking durations. If this
occurs, you may turn the burner back on and resume cooking
without issue.
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
7