Table of Contents
Advertisement
BMX-STYLE KICK SCOOTER
OWNER'S MANUAL
Read and understand this entire manual before allowing
child to use this product! For assistance contact Razor.
DO NOT RETURN TO STORE.
NOTE: Manual illustrations are for demonstration purposes only.
Illustrations may not reflect exact appearance of actual product.
Specifications subject to change without notice.
Please have your product along with the 22 character product I.D. code with you
before contacting Razor for warranty assistance and/or replacement parts.
Product I.D. Code: _____________ - ____________ - ____________
Advertisement
Table of Contents
Related Manuals for Razor FLASHBACK
Summary of Contents for Razor FLASHBACK
- Page 1 BMX-STYLE KICK SCOOTER OWNER’S MANUAL Read and understand this entire manual before allowing child to use this product! For assistance contact Razor. DO NOT RETURN TO STORE. NOTE: Manual illustrations are for demonstration purposes only. Illustrations may not reflect exact appearance of actual product.
-
Page 3: Table Of Contents
• Do not exceed the tires PSI rating. Overinflation will cause a rupture. WARNINGS FURTHER INCREASES RISK OF SERIOUS INJURY. USE • Do not exceed 220 lb (100 kg) total weight on the Flashback scooter. AT YOUR OWN RISK AND WITH APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION. -
Page 4: Before You Begin
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer... -
Page 5: Assembly And Set-Up
ASSEMBLY AND SET-UP Attaching the Handlebars Required Tool: 5 mm Allen Wrench (included) WARNING: Do not attempt to thread the stem into the front fork thread. Note: Make sure cables/wires are out of the way before inserting the stem into the fork. WARNING: Failure to properly tighten the collar clamp may allow the handlebars to... - Page 6 If you are having difficulty understanding these instructions, please contact Razor Customer Service for assistance. Insert the wheel into the front fork and insert the tab on the washers (A) into the holes (B) on the front fork. Safety washers should be on the outside of the fork facing the tire.
-
Page 7: Pre-Ride Checklist
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer... -
Page 8: Usage
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer... - Page 9 If you are having difficulty understanding these instructions, please contact Razor Customer Service for assistance. Loosen the brake clamp nut with Remove axle nuts from the Insert the replacement wheel a 10 mm wrench.
- Page 10 Replace immediately with only genuine Razor replacement wheels. Worn wheels/bearings are considered normal wear and tear and are not covered by the Warranty. Other manufacturers’ wheels may not be compatible with your Flashback scooter, may affect your safety and will void your warranty.
-
Page 11: Flashback Parts
FLASHBACK PARTS Keep your scooter running for years with genuine Razor parts. Visit our website or e-mail us for more information on spare part availability. (Specifications subject to change without notice.) 1. Handlebar Grips (Left/Right) 6. Headset 11. Deck Plate 2. -
Page 12: Warranty
Printed in China for Razor USA LLC. Copyright © 2003-2021 Razor USA, LLC. All rights reserved. Razor and the Razor logo design are among the registered trademarks of Razor USA LLC in the United States and/or select foreign countries. Flashback logo design is ®...
Need help?
Do you have a question about the FLASHBACK and is the answer not in the manual?
Questions and answers