Watchguard Firebox M5800 Hardware Manual page 2

2.2.2021
This table shows the interface specifications for the WatchGuard M5800 as shipped.
Management Interface
Network Interfaces
I/O Interfaces
The Firebox also has two slots where you can install additional interface modules. The supported
interface modules are described in the
Environmental Requirements
To safely install your Firebox, we recommend that you:
Install it in a network rack.
Put it in a secure area, such as a locked room, to block the device from people who do not have
permission to use it.
Connect it to a conditioned power supply to prevent damage from sudden power changes.
This table shows other environmental requirements for the M5800 appliance.
Operating Temperature
Operating Humidity
Non-operating Temperature
Non-operating Humidity
Hardware Description
Front
Front view of the Firebox:
Left front panel detail:
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-m5800-hardware-guide.html
Firebox M5800 Hardware Guide
1x 1000 Base TX (10/100/1000Mbps), RJ45 connector
8x 1000 Base TX (10/100/1000Mbps), RJ45 connector
4x 10 G SFP+ ports
2 USB 3.0
1 RJ45 RS232 console port
Hardware Description
0° to 40°C (32° to 104°F)
5% to 90% non-condensing
–10° to 70°C (14° to 158°F)
5% to 90%, non-condensing
section.
2/18