Table of Contents
Advertisement
11. Software interface introduction
11.1 Toolbar functions introduction：
11.1.1
open file
Open the saved data file, after opening, data and graphs presented
on the surface of the PC interface, so that the staff can analyze the
data and make assessments
11.1.2
save file
Save the current measured data to a PC's hard drive, you can
customize the address and name of file to be saved.
11.1.3
Set up parameter
this button is for real time transmission parameter setting, click
this key, a sub-dialog will pop up, it can set emissivity, date, time,
temperature unit, laser and backlight. As shown below.
13
Advertisement
Table of Contents
