Operating Instruction - HTC IRX-67 User Manual

9. Operating Instruction

1. Operating steps:
① Hold the meter by its handle grip and point it toward the
surface to be measured.
② Pull and hold the Trigger to turn the meter on, the "SCAN"
icon will appear and begin testing.
③ The surface temperature being tested will be displayed on the
LCD screen.
④ Release the trigger, the "HOLD" icon will appear, the readings
will be frozen
⑤ The meter will automatically shut off after 7 seconds after the
trigger is released.(Unless the unit is locked on)
Measurement Note：If the meter used in an ambient temperature
with wide temperature change, wait it at least 30 minutes to
adjust it.
The laser is designed for aiming only; it can be shut off while
operating in short distance to save the battery.
9