Table of Contents
Advertisement
4．Battery Replacement
4.1 When the battery is not sufficient, "
" appears in the LCD,
one new 9V battery is required.
4.2 Open the battery compartment, replace the 9V battery and
close the battery compartment.
10. Software installation
Insert the CD into the CD-driver, the software will run the setup
file directly, pls follow the installation tips to install software. if
the software do not run the setup file directly, pls Eject the CD
content and double click
to install. pls follow the
installation tips to install software after running.
Note: After the installation is complete. Need to run the software
as "administrator" when you open the software at first time.
Note: USB driver need to be installed after install the PC software
successfully
Open the installation disk file, find"Silabs-CDC-Install" and open
it, select the corresponding drive application based on the PC
system, double-click the file to install the driver.
12
Advertisement
Table of Contents
