Table of Contents
Advertisement
5
―――――――――――――――――――――――――――
1. Function Mode Indication
This area shows the measurement function and
mode.
1P_P
1P_PF
3P_PF
HARM_I
HARM_U Voltage harmonics
2. Range Indication
This area shows the current and voltage ranges.
When auto-ranging is enabled, the auto-selected
range is indicated within parenthesis, as in "AUTO
(600V)"
3. Measured Value Display
Each measurement value is shown.
4. Remaining Battery Indication
The remaining battery charge in the 3286 (-20) is
shown.
5. LEAD/LAG Indication
Phase lead and lag of the current relative to voltage
is shown.
6. RS-232C Indication
Shows RS-232C communications.
It is on during the communication.
NOTE
It goes on and off while waiting for the
communication.
It is off when there is no vacancy in the COM port.
――――――――――――――――――――――――
Chapter 2 Specifications
1φP Meter
1φPF Meter
3φPF Meter
Current harmonics
Advertisement
Table of Contents
