Advertisement
Available languages
Available languages
Thank you for purchasing our SEECODE Vibrating floor cleaner Suction-/mop function. To ensure
that you enjoy your product for a long time and can use it to its full potential, please read these
operating instructions carefully before using your appliance to avoid damage due to incorrect ope-
ration. Please pay particular attention to the safety information. If you give the unit to a third party,
this instruction manual must also be handed over.
The SEECODE Vibrating floor cleaner Suction-/mop function is equipped with a nozzle that produ-
ces a fine spray to evenly moisten the floor.
The cleaning pads are particularly suitable for conveniently and quickly cleaning all types of tiles,
marble, wood, laminate and vinyl floors and other floor materials.
Together with special cleaning and mopping pads, the daily cleaning and maintenance work on
floors becomes noticeably more efficient and much easier.
Contents of the instructions
1 Scope of delivery
2 Assembly
3 Instructions for use
4 Operating tips
5 Technical data
6 Troubleshooting
7 Safety instructions
8 Guarantee/Warranty
1
Product presentation
1.
Mains switch
2.
Spray nozzle
3.
Spray switch
4.
vacuum nozzle
5.
spray nozzle
6.
Vacuum switch
7.
Indicator lamp
8.
Pad mounting surfaces
(shaded area)
9.
Charging port
2
6
6
3
7
8
4
9
5
1 Scope of delivery
1.
2 aluminium tubes
2.
Connector
3.
Handle
4.
Cleaning unit
5
5.
Measuring cup
6.
Pads
7.
HEPA
8.
Screwdriver
9.
Charger
10. User manual
11. Battery
9
12. Screws
2 Assembly
1. Connect the aluminium tubes in the middle
with the connector and fix them with two screws.
2. Connect the aluminium tube with the handle
and tighten it with one screw.
3. After raising the joint on the cleaning unit, pla-
ce it on the floor, insert the pressed side (only the
tapered side can be inserted) of the aluminium
tube into the joint and secure it with a screw.
4.Place the SEECODE Vibrating floor cleaner
Suction-/mop function on the floor, lift it up and
place it on one or two cleaning pads, the pads
will then stick to the surface.
6
7
8
10
11
12
2
1
4
3
Advertisement
