Settings Menu - Bushnell CELLUCORE 20 Instruction Manual

SETTINGS MENU

(Check your app for these settings)
IMG. TYPE - Selects type of image files that are stored/
transmitted (note: see "Hybrid" under Video submenu).
PHOTO - Still images will be captured by the camera at
settings made in the PHOTO menu.
VIDEO - Video clips will be captured at settings made in the
VIDEO menu. NOTE: your full HD video files will be stored on
the SD card, but they cannot be transmitted wirelessly due to
the file size/cell carrier bandwidth.
HYBRID- Captures a single image followed by a video clip.
IMAGE SIZE - Selects resolution (in megapixels) for still
photos. Higher resolution provides more pixels for increased
detail, but creates larger files that take up more of the SD
card capacity (fills up faster). Available settings are: 2, 8 and
20 (megapixels). 2 is the default setting, which will deliver
excellent detail while still keeping the file size per image
reasonable for most users.
CAPTURE NUMBER - Selects the number of photos captured
per trigger event, with settings from 1 to 5 (default is 1 photo
per trigger).
VIDEO SIZE - Selects resolution for video clips. Choice of
1280x720 (720p), or 960x544 (544p).
VIDEO LENGTH - Selects duration of each video clip captured
per trigger. The default setting is 5S (five seconds per video).
From the 10 SEC setting up, length settings are in 5 second
increments. Maximum video length is 20 Seconds.
CAMERA NAME - Allows you to enter up to 12 characters
9