JBL PRX ONE User Manual page 9

SETTING UP
How to set up
• Plug Linear Array B into the Woofer Cabinet
• Plug Linear Array A into Linear Array B
• Connect AC power inlet
How to turn on/off
• Turn on unit by short pressing the power button until the LCD fires on
• Turn off the unit by HOLDING power button for 3s until unit turns off
P.A. BASICS
A mixing board is actually a very simple device that takes the audio input signals (from the input channels) and "mixes" them to
the outputs. The mixing board controls will typically enable the user to blend the input channel signal levels, affect their tone,
and adjust each channel's reverb level. The signal is then fed from the mixing board to the amplifiers and onto the speakers. The
PRX ONE is a self-contained PA system, which includes a mixing board, amplifiers, and speakers.
GETTING ACQUAINTED WITH PRX ONE
The powered mixer section of the PRX ONE system houses the mixing board and power amplifier. Here, all of the
microphones, musical instruments, and external sound sources (such as MP3 players, CD players, or Bluetooth audio
sources) can be connected.
375
Bottom View Front View
Linear Array A
Linear Array B
Woofer
446
Left View Rear View
9