JBL PRX ONE User Manual page 27

Channel Menu
1. The channel menu can be accessed by pressing the rotary knob of the respective channel you wish to access.
The active channel is visible at the top line of the LCD as well as by the dynamic LED below the respective
channel number.
a. The MUTE field will mute the respective channel.
i. While in mute, the SSM LED of the muted channel will fade RED.
ii. You can also MUTE a channel by holding the respective channel knob for 2s.
b. Channels 1-2 offers users +48v of Phantom Power. You can engage this in the Channel Menu section.
Please refer to the Phantom Power section of this guide for more information.
c. The PRX ONE offers dbx dynamics processing on each channel, with the exception of channel 7.
i. "Gate" enables editing of the gate feature on the first six input channels. Gates enable reduction of
the signal below the gate threshold level to reduce the noise floor of the input channel. Examples
include use with multiple open stage mics or when used as inputs from noisy guitar or bass amps.
.
.
.
.
To activate the Gate, Press the CH knob to enter channel strip mode and bring up the CHANNEL
MENU.
. To select the GATE, rotate the MASTER/MENU knob to the GATE field and PRESS the
MASTER/MENU knob.
"Gate" On/Off. Turns the gate on or off (i.e. off is gate bypass.)
"Reset" sets all gate settings on this channel to factory default settings.
"Presets" are available to quickly select typical noise gate situations. These include setting
for full gates, which shut off all signal when below the Gate Threshold setting. Or stepped
gates, which only reduce the volume a fixed amount when the input signal falls below the Gate
Threshold setting.
. If the user selects a preset, the lower two settings are automatically loaded with the
chosen presets settings.
27