JBL PRX ONE User Manual page 19

.
3. FX Processing is where users access the effects parameters, minus sends, of the Lexicon effects engine.
a. The PRX ONE offers a Lexicon effects engine that provides users with Reverb, Delay, Chorus and
Sub-synth effects.
i. Navigate to the FX Processing menu in the Master/Menu and press the knob to access.
ii. Here you will be able to turn the effect on/off, edit the main parameters of the effect and access
presets.
b. Reverb by Lexicon Parameters
i. "On/Off"
. When set to off, the Reverb by Lexicon input is disabled. When turning this off while active, the
current reverb sound will continue to ring out. To reduce it immediately, reduce the Level To Mix
setting.
ii. "Reset" will set the Reverb by Lexicon to off and adjust the settings to "Room Medium" default preset,
to start over as a factory default.
iii. "Presets" offers users a selection of common settings for fast selection in typical use cases. These
reverb settings are named as descriptions of the types of rooms or halls they simulate.
. Presets assist new users wanting to try quick examples of often-used reverb setting
combinations.
. The user can select "Custom" and adjust all the settings themselves. Or they can start with
one of the location description presets, listen, and then add any settings adjustments, which
automatically load the new combination of settings into the "Custom" setting for further
adjustments.
.
.
.
Custom
Room Small
Room Medium
19