Attaching The Footrests - ION Brisa Instructions For Assembly And Use

The assistance of a second person is
recommended when assembling this
unit.
Fig 1 Parts list
(A) Main body.
(B) Main post.
(56) Handlebar tube.
(43) Monitor.
(D) Front stabilizer bar with wheels.
(E) Rear stabilizer
adjustable feet.
(28) Left footrest.
(93) Right footrest.
(24) Left footrest cover with knuckle
joints.
(29) Right footrest cover with knuckle
joints.
(92) Top focus bar, right.
(60) Bottom post cover
(65) Rear post cover.
(64) Front post cover.
(12) Front knuckle joint cover.
(14) Rear knuckle joint cover.
(5) Top focus bar, left.
Fig 2 Screws and fasteners
(13) Screws M4x35
(15) Flat washer M8
(17) Spring washer M8
(23) Flat washer M10
(25) Screw M4x20
(27) Screw M10x50
(36) Screw M5x16
(49) Corrugated washer M8 Qty
(51) Allen screw M8x72
(59) Self-locking nuts M8
(70) Screw M8x20
Allen key 5 mm.
Allen key 6 mm.
Box spanner with star screwdriver.
2. ATTACHING THE
STABILIZER BARS
Bring the front stabilizer bar with
wheels (D) to the main body (A)
positioning the wheels at the front of
the unit, Fig. 3, insert screws (51), fit
the spring washers (17) and the
corrugated washers (49). Use the 5
mm Allen key to tighten securely.
Take the rear stabilizer bar with
bar with
adjustable feet (E), Fig. 4, insert the
bolts (70); fit the washers (15), and the
nuts (59) and tighten securely.
3. ATTACHING THE
FOOTRESTS
Next, remove the knobs (26), the flat
washers (23) and the screws (27) and
position the left footrest (28) (marked
with the letter "L") on top of the unit's
left foot (30), Fig.5, (left and right refers
to the user's position doing exercise)
refit the screws (27), the washers (23)
and the knobs (26) removed previously
and tighten securely.
Next, position the right footrest (93)
(marked with the letter "R") on top of
Qty 4.
the right foot (96), refit the screws (27),
Qty 2.
the washers (23) and the knobs (26)
Qty 2.
removed
Qty 4.
securely.
Qty 8.
Qty 4.
4. ATTACHING THE BOTTOM
Qty 2.
2.
POST COVER
Qty 2.
Take the main post (B) and insert the
Qty 2.
bottom post cover (60) in the direction
Qty 2.
of the arrow, Fig.6.
5. ATTACHING THE MAIN
POST
Once the bottom post cover is fitted,
remove the screws (16) and washers
(17) and (49) from the bottom of the
main post (B).
7
previously and tighten