Attaching The Handlebar - ION Brisa Instructions For Assembly And Use

ATTACHING THE MONITOR
Release screws (44), Fig 11, at the
back of the monitor.
Next, slide the front of the monitor onto
the plate on top of the main post (B) in
the direction of the arrow, Fig. 11, push
the cables down into the main post
making sure not to pinch any of the
cables. Replace
removed previously.
Once you have checked that the
monitor works correctly, go on to fit the
trim covers to the handlebar.
10. ATTACHING THE
HANDLEBAR
Take the handlebar (56), remove
screws (45) along with the spring
washers (17) and the flat washers (15).
Fit the front trim cover (64) onto the
handlebar as shown in Fig.12, position
the ends of the handlebar on the plate
at the top of the main post (B), Fig.12A.
Refit the screws
previously and then fit the rear cover
(65), Fig.12 B, use screws (25 & 36).
ATTENTION:
It is important to retighten all of the
screws involved in assembling the
machine after approximately a week of
use as this will prevent any strange
noises and possible damage.
the screws (44)
(45) removed
EXERTION SETTINGS
To provide an even level of exertion
during exercise, this appliance is
equipped with a tensioning control (62),
located on the main post (B), offering
various exertion settings, Fig. 11.
To increase pedal resistance turn the
tensioning control (62) clockwise (+)
until the exertion level best suits your
exercise requirements.
pedal resistance turn the tensioning
control (62) counterclockwise (-).
LEVELING
Once the unit has been placed into its
final position, make sure that it sits flat
on the floor and that it is level. This can
be achieved by screwing the adjustable
feet (Y) up or down, as shown in Fig.
13.
MOVEMENT & STORAGE
The unit is equipped with wheels (W) to
make it easier to move. The wheels
located at the front of your unit make it
easier to move it into a chosen
position, by lifting the rear of the unit up
slightly and pushing it, as shown in
Fig.14. Store your unit in a dry place,
preferably not subject to changes in
temperature.
9
To reduce