Sealey TP6803 Instructions

Thank you for purchasing a sealey product. Manufactured to a high standard this product will give you years of trouble free performance
if these instructions are carefully followed and the product is correctly maintained.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREmENTS, WARNINGS AND CAUTIONS.
USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO mAY CAUSE DAmAGE
OR PERSONAL INJURY, AND WILL INvALIDATE THE WARRANTY. PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
WARNING! Ensure health & safety, local
authority, and general workshop practice
regulations are strictly adhered to when using
this equipment.
Familiarise yourself with product application
and limitations, as well as the specific
potential hazards peculiar to this product.
Maintain the pump in good condition (use an
authorised service agent).
Replace or repair damaged parts. Use
genuine parts only. Non authorised parts will
invalidate the warranty.
Use only to pump NON-Corrosive fluids such
as oil, anti-freeze, degreasants, solvents,
agricultural and industrial chemicals, and the like.
Ensure safety eye protection and protective
clothing are worn when using this product.
Keep the work area clean, uncluttered and
ensure there is adequate lighting.
Maintain correct balance and footing. Ensure
the floor is not slippery.
Keep children and unauthorised persons away
from the working area.
Dispose of waste liquids in accordance with
local authority regulations.
DO NOT use to extract corrosive fluids.
DO NOT dismantle, tamper with or adapt the
pump for any purpose other than for which it
is designed.
DO NOT use the unit if it has been dropped or
mishandled, check the unit to ensure there is
no damage.
DO NOT use the pump as a handle to move
the fluid drum.
Keep the pump clean and store in a safe dry,
childproof location.
WARNING! DO NOT allow uncontrolled
discharge of fluids thus polluting the
environment.
2. APPLICATION
Polypropylene lever pump with steel rod and
diptube, suitable for use with oils, anti-freeze,
degreasants and other non corrosive fluids.
Features polyoxymethylene handle for prevention
against aggressive fluids melting the handle. Fitted
with 360° outlet nozzle. suitable for 205ltr drums.
Delivers approximately 400ml per stroke.
INsTRUCTIONs FOR:
LEvER ACTION PUmP
MODEl No:
fig.1
fig.2
Original Language Version
TP6803
TP6803 Issue No:1 - 06/07/10