Adclock Jumper; Figure 1-6. Relay Made Feedback Jumper; Figure 1-7. Adclock Jumper - Brainboxes AD-1200 H User Manual

Analog Relay Mux Board
Input Bit 0 etc.
____________________________________ _

Figure 1-6. Relay Made Feedback Jumper.

JUMPER ______ LABEL _____
INCORRECT RIGHT
CH0
CH1
CH2
CH3
CH4
CH5
CH6
CH7

ADCLOCK Jumper.

__________________
The AD1200 series cards have an external clock input line
EXT CLOCK, that can be used to strobe A/D conversions when
the card is in mode 3. The EXT CLOCK line must be driven by
a high to low going edge. The ADMUX card's relay made feed
back signal can be used to drive this input so allowing the A/D
converter to automatically start an A/D conversion as soon as the
relays have switched through the input signal. The ADMUX
card's line is tristated and so several boards can all be jumpered
onto the AD1200 input, each board driving it as it is selected.
____________________________

Figure 1-7. ADCLOCK Jumper.

JUMPER ______ ________ FUNCTION
NOT DRIVING AD1200 EXTERNAL CLOCK INPUT
DRIVING AD1200 EXTERNAL CLOCK INPUT - AUTO CLOCKING
_____ LABEL FEEDBACK BIT ____________
DI0 Digital Input Port Bit 0
DI1 Digital Input Port Bit 1
DI2 Digital Input Port Bit 2
DI3 Digital Input Port Bit 3
DI4 Digital Input Port Bit 4
DI5 Digital Input Port Bit 5
DI6 Digital Input Port Bit 6
DI7 Digital Input Port Bit 7
Reference
DEFAULT
DEFAULT
Page 7