Related Manuals for Asahi/America Proweld Shop 12
Summary of Contents for Asahi/America Proweld Shop 12
- Page 1 Proweld™ Equipment Operations & Maintenance Manual Shop 12 Welding Tool Tel: 781-321-5409 ● Fax: 800-787-6861 ● Toll Free: 800-343-3618 www.asahi-america.com ● asahi@asahi-america.com Direct Sales: East 800-232-7244 / Central 800-442-7244 / West: 800-282-7244...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Section Page Safety Precautions Welding Conditions III. Machine Set Up and Operation Welding Parameters Maintenance Asahi/America Contacts Asahi/America, Inc. Shop 12 O&M Manual 2102D Engineering & Rental - 14 pages... -
Page 3: Safety Precautions
11. Do not use tools and machines when housing or handles, specifically plastic ones, are bent or cracked. Dirt and humidity in any fracture can lead to electrical shock should the insulation in the machine be damaged. Asahi/America, Inc. Shop 12 O&M Manual 2102D... -
Page 4: Welding Conditions
10. The heating element surfaces should be clean and, above all, free from grease. Therefore, they should be cleaned with lint-free paper and isopropyl alcohol before welding (or if they are dirty). Asahi/America, Inc. Shop 12 O&M Manual 2102D Engineering & Rental - 14 pages... -
Page 5: Machine Set Up And Operation
A. For 12” (250mm) pipe and fittings, use the 12” master clamps. B. For pipe sizes smaller than 12”, place the appropriate clamp insert into the 12” master clamps and fasten with the cap screws. Asahi/America, Inc. Shop 12 O&M Manual 2102D Engineering & Rental - 14 pages... - Page 6 The misalignment of the pipe should not exceed 10% of the wall thickness of the pipe. D. Loosening or tightening the clamps can eliminate egg-shaped pipe. Asahi/America, Inc. Shop 12 O&M Manual 2102D Engineering & Rental - 14 pages...
- Page 7 Prefabrication under workshop conditions Low additional pressure when unclamping III. No additional pressure during further cool down System will not see pressure until cool down is complete Asahi/America, Inc. Shop 12 O&M Manual 2102D Engineering & Rental - 14 pages...
-
Page 8: Welding Parameters
Parameters can also be accessed in the following ways: A. Located on our website at www.asahi-america.com under the resources tab of each product page. B. Through Asahi/America’s welding web app at https://myasahi.asahi- america.com/welding or scan the QR code on the right. How to scan the QR code: 1. - Page 9 4. Wait for a web address pop-up to appear. Click on the pop-up to take you the weld parameter app. Asahi/America, Inc. Shop 12 O&M Manual 2102D Engineering & Rental - 14 pages...
- Page 10 & material, and pipe size from the the timer. To search for a different drop-down options. Then, click ‘search’. parameter, click ‘search’ in the upper left corner. Asahi/America, Inc. Shop 12 O&M Manual 2102D Engineering & Rental - 14 pages...
-
Page 11: Maintenance
5. For a long service-life clean and grease regularly the threaded spindles and the joint parts which are used for clamping the pipe. 6. Asahi/America recommends maintenance work after one year for contractor-owned tools. Asahi/America, Inc. Shop 12 O&M Manual 2102D Engineering &... -
Page 12: Asahi/America Contacts
Field Technician/Onsite Training Field Training 617-480-7071 info@asahi-america.com Technical Service High Purity, Double Wall or Industrial Piping 781-321-5409 pipe@asahi-america.com Asahi/America Corporate Headquarters Asahi/America, Inc. 655 Andover St. Lawrence, MA 01843 800-343-3618 asahi@asahi-america.com Asahi/America, Inc. Shop 12 O&M Manual 2102D Engineering & Rental - 14 pages... - Page 13 PAGE LEFT INTENTIONALLY BLANK. Asahi/America, Inc. Shop 12 O&M Manual 2102D Engineering & Rental - 14 pages...
- Page 14 Tel: 781-321-5409 ● Fax: 800-787-6861 ● Toll Free: 800-343-3618 www.asahi-america.com ● asahi@asahi-america.com Direct Sales: East 800-232-7244 / Central 800-442-7244 / West: 800-282-7244...
Need help?
Do you have a question about the Proweld Shop 12 and is the answer not in the manual?
Questions and answers