Table of Contents
Advertisement
Preparation
Qualcomm Software
Install
Qualcomm's USB driver
(contains QFIL) on your PC.
Charge the Device
Make sure the device is charged. To do, so connect it to its power adapter. If the LED next to
the power button is red or off, leave the device charging. The same LED will turn blue when the
device is sufficiently charged.
Backup Persist Partition
Currently, the QFIL process will delete the persist partition on the device. This will create MAC
address inconsistencies. Before beginning the QFIL process, use the adb pull command to
backup your persist partition by following these instructions:
1. Check that adb can communicate with your device with the adb devices command.
a. You should see the following if adb is working correctly:
2. After confirming that adb and your device are communicating, use adb pull persist to
backup the persist partition. The command will copy persist to your user folder:
Questions? Feedback? Please contact
(if you have not done so already) and the
Michael Thot
or assign him a Task using
QPST package
this
template.
v0.9 | 19
Advertisement
Table of Contents
