Gemini EVT User Manual page 18

Viewing VRS Files
VRSPlayer can playback VRS files. There are two ways you can get the binary:
● If you have ovrsource locally cloned;
○ Run the following command to build the VRSPlayer binary: $ buck run
@mode/linux/dev-release vrsplayer (replace "linux" with "mac" or "win"
for other systems)
● If you don't not have a clone of ovrsource;
○ You can download pre-built binaries
Once you have the tool built or downloaded, simply
1. Run VRSPlayer.exe to launch the program.
2. After VRSPlayer launches, click File (upper-left corner) and then Open.
3. Select the VRS file you pulled.
4. Press the play button.
5. You should see all four camera streams:
Normal and Specialty Boot Modes
● Power On: Apply USB power, or hold the power button for 3 seconds.
● Power Off (Software Shutdown): Hold PoE button for 3 seconds.
Questions? Feedback? Please contact Michael Thot or assign him a Task using
from this folder.
this template.
v0.9 | 17