Installation - WestminsterLab Rei Operational Manual

4

Installation

Unpacking the amplifier from the box
Please lift the amplifier with meticulous care for the amplifier is about 16kg
pounds. It is recommended to move it to a location near the place where it
will be installed when the amplifier is still in its case. Remove all jewellery
including watches, rings and belts to avoid damages to the exterior of the am-
plifier during the removal and installation.
Installation and precautions
Before any installation or connection, it is a MUST to make sure the AC mains
voltage matches the specification of the amplifier. (E.g. 1 10V for Japan, 1 10V for
US, 230V for UK) The AC mains voltage specification & serial number of the
specific amplifier is written on the plaque located at the back of the unit.
Improper input of the AC mains voltage will permanently damage the amplifi-
er and it is not within the warranty conditions.
WARNING! NEVER unplug any cables during operation. It may cause failure
or damage to the amplifier and speakers. Be sure that the amplifier is off with
NO LED illumination in the front before unpluging any cables. It is even safer
to unplug the AC power cord before unpluging other cables.
It is suggested that there is adequate ventilation for the amplifier and place it
on a stable and safe surface.
-6-