Operation - WestminsterLab Rei Operational Manual

8

Operation

Initial power-up of the amplifier
PLEASE be sure that all cables are connected correctly before power-up.
Missing or loose XLR input cable or shorting the speaker cables may cause
failure and non-reversible damage to the amplifier and speaker.
The power switch is located on the front right underside edge of the am-
plifier. Ticking the toggle to the right will power up the amplifier. The front
LED should illuminate as RED and within 20 seconds change to WHITE, which
means the amplifier is now ready for operation.
After the power is switched on, the amplifier requires approximately 30 min-
utes to reach optimal operating condition. Although the amplifier will sound
excellent upon initial listening, the sound quality will improve as it warms up.
During operation
The Rei amplifier requires no adjustments during normal operation. If there is
no sound or the sound quality is in some way impaired, consult the "Trouble-
shooting" section in this manual.
WARNING! NEVER unplug any cables during operation. It may cause failure or
damage to the amplifier and speakers. Be sure that the amplifier is off with no
LED illumination in the front before unpluging any cables. It is even more safe
to unplug the AC power cord before unpluging other cables.
-12-